Auto GPS Trackers , Car GPS Tracking Systems Support CAN BUS
Adopt double core chip, RTKe embedded OS
GPRS, SMS double channels module
Quadruple protection for power source, 4 levels watchdog
Three proofing protection
Water-proof design for casing, water-proof grade IP67
Car battery protecting voltage
Low: 10V(12V car battery)or 20V(24V car battery)high:60V
Power voltage of Anti-reversed connection
Average working current
70mA DC 12V
Power saving mode
＜30mA DC 12V
Working time 3h
85x 134x 35mm(L x W x H)
Main device weight
BNC interface: －26dB cable length: 4m
SMA interface: －3dB cable length: 3m
Vehicle detecting interface
2 routes(1 route high level, 1 route low level)
AD detecting interface
1 route AD signal input(for fuel consumption detecting GPS device)
1 route CAN BUS
1 route 485 port
1 route RS-232 serial port
1.Signal detecting and control:
6 routes signal sensor, 7 vehicle status detecting, intelligence
mode and forced mode to cut fuel/circuit; user-defined backup
8 alarms, 3 modes of alarm.
vehicleautomatic tracking/monitoring, regions setting, geo-fence,
GPS mileage statistics, blind area supplementary report, traces
storage, base station positioning.
via CAN/485 BUS to achieve two ways communication between PLC
controller and service center, real time monitor vehicle status and
5.Fuel consumption detecting:
build-in AD input interface, equipped floater attenuation cable can
measure fuel consumption.
main device’s program was support to remote download; user can
renew the program remotely.
Power saving mode: in this mode, GPS device’s working current will
drop to30mA@12V when vehicle was in flameout.
Car battery over discharge protection: it will switch to supply
power by backup battery if car battery’s voltage is very low (10V).
Over voltage protection: it will cut the external circuit to
protect GPS device if the voltage exceeds limit value (60V), backup
battery can work for 3h.
1. Standard configurations
1)main device 1 pcs
2)GSM antenna 1 pcs
3)GPS antenna 1 pcs
2. Optional configurations
1). Accessories (relay) for cut fuel/circuit
2). Accessories for fuel detecting (floater attenuation cable)